Rubber Fender Manufacturers teach you about the bonding technology of marine inflatable rubber Fender


Rubber Fender Manufacturers teach you about the bonding technology of marine inflatable rubber Fender

Rubber Fender ManufacturersIn the production of marine inflatable fenders, its quality of production is what we value, because in the process of our use, the quality of these fenders is very good, if there is no reliable quality, will give us a great impact on the use of bonded work is the production of marine fenders we need to carry out, Bonding technology will also have a great impact on the quality of marine inflatable rubber fenders, and then weRubber Fender ManufacturersJust to get a good idea of the bonding technology for marine inflatable fenders, how to make the boat with inflatable rubber fender production better.

  Rubber Fender ManufacturersIn the process of manufacturing rubber binder products, the bonding and fitting between parts and parts is very common. Not vulcanized adhesive bonding between the general use of hot bonding method, because the plastic material in hot laminating generally have a good bonding performance, half of the calendering process can be used to heat the rubber fender of the plastic parts combined together. Bonding at room temperature, it is necessary to use solvent brushing adhesive surface to remove impurities, to ensure bonding effect. For adhesive performance is too poor glue must also be brushing adhesives before bonding. The natural adhesive is generally good, easy to form processing, synthetic rubber material, especially non-polar synthetic binder is poor, bonding is difficult, must undergo appropriate modification, such as the introduction of resin in the molecular chain or adding polar resin in the plastic throw to improve its bonding performance.


Not only the above bonding knowledge needs us to understand, we also need to know that the plastic materials in the formulation of plasticizers and other components easily migrated to the surface, but also affect the interface between the good contact. These factors are not conducive to bonding interface between the formation of the transition layer, thus affecting the bonding effect, resulting in the marine inflatable rubber Fender quality affected, so we ship inflatable fenderRubber Fender Manufacturers, it is very important to attach importance to the selection of bonding agent and bonding technology.



Previous: No Information

下一条: Solid polyurethane floating rubber fenders are widely used in ports, offshore, and ship-by-boat operations.

返回顶部