What is the correct use of rubber fenders that are often used in the marine industry?


What is the correct use of rubber fenders that are often used in the marine industry?

Dear readers, everyone, it is well known that rubber fenders are highly efficient, flexible, reduce the pressure on the ship and protect the bottom of the ship. However, these advantages can only be achieved through proper use, so today Xiaobian will introduce you briefly. Take a look at the correct use of rubber fenders .

1. When the ship is jacked up from the pier, it must be operated in strict accordance with the regulations.
2. Unscrew the wire rope of the ship so that the ship slides down to accelerate the linear motion into the water. In this process, the ship will be mainly supported by the rubber fender support force and the friction of the airbag against the ship's floor and gravity. The manufacturer can pass Adjusting the airbag inflation pressure to adjust the inclination angle of the ship, so that the gravity component of the ship is slightly larger than the friction force, and then the appropriate sliding force is formed, the ship slides down the slideway, and the sliding speed is gradually reduced.
3. When the ship enters the water, the stern will be subjected to the buoyancy of the water. At this time, the ship will continue to move forward. As the stern volume immersed in the water increases, the stern will gradually rise until the ship leaves the ship platform.
Jiangsu Anjin Rubber Co., Ltd. is a professional enterprise in the rubber fender , bollard and bridge anti-collision industry. It integrates design, research and development, production and sales into one. After years of dedicated management, it has become an industry strength enterprise. Company address: Gaojiao City, Jiangsu Province, unloading industrial park.


Previous: Type D rubber fender anti-collision strip type introduction

下一条: Rubber fender impact plate - rubber fender front with anti-shock steel frame

返回顶部